Oil absorption explained: the filler figure that decides your binder cost
Every calcium carbonate data sheet lists oil absorption. Here is what it measures and why it matters to your formulation cost.
Oil absorption is one of the less glamorous lines on a calcium carbonate data sheet, but it can decide how much a formulation costs.
What it measures
Oil absorption is the amount of oil, in grams, needed to wet 100 grams of powder into a paste, measured to ISO 787/5. It tells you how much liquid the filler surface and the spaces between particles will take up.
Why it matters
In paint, the oil stands in for binder; in PVC and rubber, for plasticiser. A filler with high oil absorption needs more of these, which usually cost far more than the filler itself.
What drives it
Particle size: finer powders have more surface, so they absorb more.
Particle size distribution: a wider spread packs more tightly and absorbs less.
Particle shape: plate-like fillers absorb more than blocky ones.
Our grades
Across our range, oil absorption runs from 20.5 g/100 g for the very fine QM 2 SF down to 14.5 for QM 11 and QM 19. DOP absorption, which matters for flexible PVC, runs from 32 down to 25. Both figures are on every data sheet, so you can predict binder or plasticiser demand before a trial.
From the paint on your wall to the pipe under your street, calcium carbonate is one of the most widely used minerals in manufacturing. Here is where it goes and why.
Both are calcium carbonate. One is mined and milled, the other is made in a reactor. How they differ, and when ground calcium carbonate is the better buy.