
Mesh to micron chart for calcium carbonate
Convert mesh sizes to microns and back, and see where each of our calcium carbonate grades sits.
Convert mesh and microns
Approximate. Below about 20 microns there are no physical sieves, so mesh numbers are a trade convention.
Mesh is the number of openings per inch of a sieve. The higher the mesh, the finer the powder that passes through. Many buyers, especially those used to Asian suppliers, still order calcium carbonate by mesh, while data sheets give particle size in microns.
Why microns tell you more
A mesh number only tells you the coarse limit of a powder. Two powders sold as "800 mesh" can behave very differently if one is much finer overall. That is why our data sheets give two figures: D50, the median particle size, and D97, the size that 97% of particles fall below. The D97 is the figure closest to what a mesh number describes.
Physical sieves stop at about 635 mesh, or 20 microns. Finer "mesh" numbers, such as 1,250 or 2,500 mesh, are a trade convention rather than a sieve test, so always ask for laser diffraction figures for fine grades.
Our grades in mesh
Mesh to micron chart
| Mesh | Microns (µm) | Basis |
|---|---|---|
| 60 | 250 | Standard sieve |
| 80 | 180 | Standard sieve |
| 100 | 150 | Standard sieve |
| 120 | 125 | Standard sieve |
| 140 | 106 | Standard sieve |
| 170 | 90 | Standard sieve |
| 200 | 75 | Standard sieve |
| 230 | 63 | Standard sieve |
| 270 | 53 | Standard sieve |
| 325 | 45 | Standard sieve |
| 400 | 38 | Standard sieve |
| 450 | 32 | Standard sieve |
| 500 | 25 | Standard sieve |
| 635 | 20 | Standard sieve |
| 800 | 15.6 | Trade convention |
| 1,000 | 12.5 | Trade convention |
| 1,250 | 10 | Trade convention |
| 1,500 | 8.3 | Trade convention |
| 2,000 | 6.25 | Trade convention |
| 2,500 | 5 | Trade convention |
| 3,000 | 4.2 | Trade convention |
| 5,000 | 2.5 | Trade convention |
Tell us the grade and the tonnage.
You get a price, a lead time and a technical data sheet. No runaround.