+254 717 060 009 +254 796 000 247 (WhatsApp) info@qualitymineralssezltd.com
QUALITY MINERALS SEZ LIMITED

Find the grade for your process.

Natural micronized calcium carbonate, each grade milled and classified to a defined particle size. Every grade has its own page and technical data sheet.

Find your grade

Pick a grade to see its key figures and data sheet. Figures shown are target specifications. D50 is the median particle size. D97 is the size that 97% of particles fall below.

Download the grade chart (PDF)

Fine grades
Product codeD50 (microns)D97 (microns)Finer than 2 micronsTypical uses
2850%Coated paper, high-gloss paints and thin films
2.51040%Emulsion paints, paper and calendered PVC sheet
2.511.540%Injection moulding and PVC compounds
31235%Paints, PVC profiles and cables

QM 2 SF

Half the particles are finer than 2 microns, and 97% are finer than 8 microns.

Typical uses: Coated paper, high-gloss paints and thin films.

Finer than 2 microns
50%
Brightness
≥96.5%
Oil absorption
20.5 g/100 g
Bulk density
0.55 g/cm³
An excavator moving white calcium carbonate rock at the quarry

Shared by every grade

Every grade starts as the same high-purity limestone. Only the particle size changes. These are the target figures they all share.

  • CaCO3 content≥ 99.60%
  • Brightness, Ry≥ 96%
  • Moisture, ex works0.2% max
  • pH value9 max
  • Hardness3 Mohs
  • Refractive index1.59

Chemical analysis of the raw material

Calcium carbonate, CaCO3≥ 99.60%
Calcium oxide, CaO≥ 55.60%
Magnesium oxide, MgO≤ 0.15%
Iron oxide, Fe2O3≤ 0.01%
Aluminium oxide, Al2O3≤ 0.04%
Silica, SiO2≤ 0.06%
HCl insoluble content≤ 0.2%
Loss on ignition43.95%
Pallets of bagged calcium carbonate labelled with grade and batch

Packed in 25 kg bags or jumbo bags

Every grade will be supplied in 25 kg bags or jumbo bags, each carrying its grade and batch, so what arrives at your factory can be traced back to what was tested at ours.

  • 25 kg bags or jumbo bags for every grade
  • Grade and batch printed on every bag
  • A technical data sheet for every grade

Choosing a size

Go finer for smoother surfaces, higher gloss and strength in thin sections. Go coarser to fill more volume for less.

  • QM 2 SF to QM 3: paints, paper, film, calendered sheet and masterbatch
  • QM 3 S to QM 5 S: PVC pipes and profiles, rubber and textured coatings
  • QM 11 and QM 19: adhesives, putties, sealants, glass and drilling fluids

Treat these as starting points. Tell us what you make and we will recommend a grade and send its technical data sheet.

Tell us the grade and the tonnage.

You get a price, a lead time and a technical data sheet. No runaround.

WhatsApp us