+254 717 060 009 +254 796 000 247 (WhatsApp) info@qualitymineralssezltd.com
QUALITY MINERALS SEZ LIMITED

Products

QM 2 SF

Natural micronized calcium carbonate with a median particle size of 2 microns. Typical uses: coated paper, high-gloss paints and thin films.

Particle size distribution

Cumulative volume against particle size, measured by laser diffraction. Target values.

0.11101000255075100D50 2D97 8Particle size (microns), log scaleCumulative volume (%)

QM 2 SF is the finest grade in our range. Half of its particles are below 2 microns and the top cut is held at 8 microns, so it can go where a coarse particle would show: high-gloss paint films, coated paper and thin plastic film.

Its brightness target is the highest in the range, at least 96.5%, which makes it the grade to start with when colour is critical. The trade-off of a very fine powder is a higher oil absorption, 20.5 g/100 g, so expect it to take a little more binder or resin than the coarser grades.

Product data

PropertyUnitTarget valueMethod
Brightness, Ry (C/2°)%≥ 96.5DIN 53163
Colour, CIE L*a*b*98.3 / 0.12 / 1.1DIN 6174
Top cut, D97microns8 ± 0.2ISO 13320
Median size, D50microns2 ± 0.2ISO 13320
Finer than 2 microns%50 ± 2ISO 13320
Residue on 45 µm sieve% max0.01
Moisture, ex works% max0.2

General product data

PropertyUnitTarget valueMethod
Loose bulk densityg/cm³0.55
pH valuemax9ISO 787/9
Oil absorptiong/100 g20.5 ± 0.5ISO 787/5
DOP absorptiong/100 g32 ± 0.5ISO 787/5
HardnessMohs3
Refractive index1.59

Chemical analysis of the raw material

Calcium carbonate, CaCO3≥ 99.60%
Calcium oxide, CaO≥ 55.60%
Magnesium oxide, MgO≤ 0.15%
Iron oxide, Fe2O3≤ 0.01%
Aluminium oxide, Al2O3≤ 0.04%
Silica, SiO2≤ 0.06%
HCl insoluble content≤ 0.2%
Loss on ignition43.95%

Applications

Where QM 2 SF is used

All industries

Tell us the grade and the tonnage.

You get a price, a lead time and a technical data sheet. No runaround.

WhatsApp us