Calcium carbonate vs talc vs kaolin: which filler when?
Three white mineral fillers, three different jobs. A plain comparison for paint, plastics and paper.
Calcium carbonate, talc and kaolin (china clay) are the three white mineral fillers most manufacturers meet. They are often used together, but they do different jobs.
Calcium carbonate
Soft, white, low in cost and widely available. It extends paint and plastics, adds stiffness to PVC and brightness to paper. Its rounded, blocky particles keep oil absorption low.
Talc
A plate-like magnesium silicate. The plates stiffen plastics such as polypropylene much more than calcium carbonate does, and improve barrier properties in coatings. It costs more and can dull whites.
Kaolin
A plate-like clay that gives opacity and smoothness in paper coating and some paints. It absorbs more oil and water than calcium carbonate.
A quick guide
Lowest cost per tonne and high brightness: calcium carbonate
Maximum stiffness in polypropylene: talc
Paper coating smoothness and gloss: kaolin, often blended with fine calcium carbonate
Rigid PVC pipe and profiles: calcium carbonate
Many formulations use calcium carbonate as the main filler and a smaller share of talc or kaolin for a specific property. If you are reviewing a formulation, start from the grade finder and ask us which grade fits.
From the paint on your wall to the pipe under your street, calcium carbonate is one of the most widely used minerals in manufacturing. Here is where it goes and why.
Both are calcium carbonate. One is mined and milled, the other is made in a reactor. How they differ, and when ground calcium carbonate is the better buy.