Calcium carbonate in paint: how to choose the right grade
The extender that makes up much of every litre of emulsion paint. What it does, what to look for, and which grades fit which finish.
In most decorative paints, calcium carbonate is the single largest solid ingredient by weight. Choosing the right grade affects cost, opacity, sheen and how the paint behaves in the can.
What calcium carbonate does in paint
Builds body and solids at low cost
Spaces out titanium dioxide particles so each one scatters light better
Controls sheen: finer grades for silk and gloss, coarser for matt
Helps keep pH stable in water-based paint
What to look for
Brightness keeps whites white and colours clean. Ours is at least 96% on every grade. Particle size sets gloss and texture: a tight top cut avoids grit in smooth finishes. Oil absorption tells you how much binder the filler will take up; lower means more economical in high-loaded paints.
Matching grade to finish
Silk and gloss finishes: QM 2 SF or QM 2
Standard emulsions: QM 2 or QM 3
Matt and contract emulsions: QM 3 or QM 4
Textured coatings and plasters: QM 5 or QM 5 S
Treat these as starting points and check the paints and coatings page or ask us for a recommendation for your formulation.
From the paint on your wall to the pipe under your street, calcium carbonate is one of the most widely used minerals in manufacturing. Here is where it goes and why.
Both are calcium carbonate. One is mined and milled, the other is made in a reactor. How they differ, and when ground calcium carbonate is the better buy.